The slewing bearing, also called a turntable bearing, can be provided with various types and sizes of holes. Also, it is available in different configurations, such as internal gear, external gear, and gearless types. Special double row and triple row configurations are also provided so as to meet individual demands.
TYPE A LOAD CONDITION | ||||
Radial | Radial | Radial | Radial | Radial |
Radial | Radial | Radial | Radial | Radial |
Designation | Boundary Dimension | Mounting Hole Size | Structure Size | Gear Data | Tangential Gear Load | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
External Gear | D mm |
d mm |
H mm |
D1 mm |
D2 mm |
n | Φ mm |
n1 | d mm |
D3 mm |
d1 mm |
H1 mm |
h mm |
x | m mm |
z | De mm |
Normalizing Z 104N | Tempering T 104N | Weight (kg) |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
The design’s of all these Crossed Roller Bearings series are based on standard structures;
1. Load capacities are not additive
2. The maximum shaft or housing fillet radius that the bearingcomers will clear for this series is 0.015
3.Race Width Tolerance:+0.000 -0.005"
Designation | Boundary Dimension | Mounting Hole Size | Structure Size | Gear Data | Tangential Gear Load | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
External Gear | D mm |
d mm |
H mm |
D1 mm |
D2 mm |
n | Φ mm |
n1 | d mm |
D3 mm |
d1 mm |
H1 mm |
h mm |
x | m mm |
z | De mm |
Normalizing Z 104N | Tempering T 104N | Weight (kg) |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
The design’s of all these Crossed Roller Bearings series are based on standard structures;
1. Load capacities are not additive
2. The maximum shaft or housing fillet radius that the bearingcomers will clear for this series is 0.015
3.Race Width Tolerance:+0.000 -0.005"
Designation | Boundary Dimension | Mounting Hole Size | Structure Size | Gear Data | Tangential Gear Load | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
External Gear | D mm |
d mm |
H mm |
D1 mm |
D2 mm |
n | Φ mm |
n1 | d mm |
D3 mm |
d1 mm |
H1 mm |
h mm |
x | m mm |
z | De mm |
Normalizing Z 104N | Tempering T 104N | Weight (kg) |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
The design’s of all these Crossed Roller Bearings series are based on standard structures;
1. Load capacities are not additive
2. The maximum shaft or housing fillet radius that the bearingcomers will clear for this series is 0.015
3.Race Width Tolerance:+0.000 -0.005"
Designation | Boundary Dimension | Mounting Hole Size | Structure Size | Gear Data | Tangential Gear Load | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
External Gear | D mm |
d mm |
H mm |
D1 mm |
D2 mm |
n | Φ mm |
n1 | d mm |
D3 mm |
d1 mm |
H1 mm |
h mm |
x | m mm |
z | De mm |
Normalizing Z 104N | Tempering T 104N | Weight (kg) |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
The design’s of all these Crossed Roller Bearings series are based on standard structures;
1. Load capacities are not additive
2. The maximum shaft or housing fillet radius that the bearingcomers will clear for this series is 0.015
3.Race Width Tolerance:+0.000 -0.005"
Designation | Boundary Dimension | Mounting Hole Size | Structure Size | Gear Data | Tangential Gear Load | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
External Gear | D mm |
d mm |
H mm |
D1 mm |
D2 mm |
n | Φ mm |
n1 | d mm |
D3 mm |
d1 mm |
H1 mm |
h mm |
x | m mm |
z | De mm |
Normalizing Z 104N | Tempering T 104N | Weight (kg) |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
The design’s of all these Crossed Roller Bearings series are based on standard structures;
1. Load capacities are not additive
2. The maximum shaft or housing fillet radius that the bearingcomers will clear for this series is 0.015
3.Race Width Tolerance:+0.000 -0.005"
Designation | Boundary Dimension | Mounting Hole Size | Structure Size | Gear Data | Tangential Gear Load | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
External Gear | D mm |
d mm |
H mm |
D1 mm |
D2 mm |
n | Φ mm |
n1 | d mm |
D3 mm |
d1 mm |
H1 mm |
h mm |
x | m mm |
z | De mm |
Normalizing Z 104N | Tempering T 104N | Weight (kg) |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
The design’s of all these Crossed Roller Bearings series are based on standard structures;
1. Load capacities are not additive
2. The maximum shaft or housing fillet radius that the bearingcomers will clear for this series is 0.015
3.Race Width Tolerance:+0.000 -0.005"
Designation | Boundary Dimension | Mounting Hole Size | Structure Size | Gear Data | Tangential Gear Load | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
External Gear | D mm |
d mm |
H mm |
D1 mm |
D2 mm |
n | Φ mm |
n1 | d mm |
D3 mm |
d1 mm |
H1 mm |
h mm |
x | m mm |
z | De mm |
Normalizing Z 104N | Tempering T 104N | Weight (kg) |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
011.20.200 | 280 | 120 | 60 | 248 | 152 | 12 | 16 | 2 | 201 | 50 | 10 | 40 | 0 | 3 | 98 | 300 | 280 | 1.5 | 2.1 | 18 |
The design’s of all these Crossed Roller Bearings series are based on standard structures;
1. Load capacities are not additive
2. The maximum shaft or housing fillet radius that the bearingcomers will clear for this series is 0.015
3.Race Width Tolerance:+0.000 -0.005"